Echo Marine Group Online Test You are required to get a 100% correct score to pass the test. Name Business Vessel Email Phone Number Contractor Induction Test For this part of the test, make sure you have read the following thoroughly; Contractor Induction Manual Sub-Contractor Procedure Conditions of Entry 1. What is required to be read and understood before commencement of Works on an Echo Marine Group site? PROC 42 Sub-Contractor Procedure POL 03 Conditions of Entry Policy All of the above 2. What are some of the key points required to be followed in the Sub-Contractor Procedure? Signing in Following Safety Requirements on site Actions taken for failure to comply with Safety All of the above 3. What are the minimum PPE requirements for Contractors on site Hard Hat, Safety Glasses, Hearing Protection, High Vis Shirt (Long Sleeve for Hot Works), Work Trousers, Safety Boots, All of the above 4. When entering site, what is required by Contractors before starting works? Sign in to the Contractors Sign In log. Advise Project Manager if you can start work Ensure all material is on site before work starts 5. If there is a requirement to work in or transit through the main work yard, what is the requirement under the site owner’s rules? Undertake the AME Marine Support Base Contractors Online Induction, Provide Guard with Induction Paperwork, Receive relevant sticker and ensure it is placed on your helmet, Sign in at guard house upon arrival, All of the above 6. If you need to bring your work vehicle on site through the lower sliding gate, what are you required to provide to Echo Marine Group? Vehicle Type and Colour, Any distinguishing details of the vehicle, Registration details, All of the above 7. Are Private vehicles allowed on site? Yes No May be approved for vessel masters and crew under certain circumstances, with approval sought through the AME Facility Manager 8. For Contractors to use Echo Marine Group equipment, what must be provided or undertaken? High Risk Work License for High Risk Machinery such as Fork Lifts, approval must be sought through the HSEQ Manager via the relevant departmental Manager. Copies of High Risk Work Licenses must be provided before any approval is given. For overhead cranes, bandsaws and other workshop machinery, Training and Competence must be provided and approved by the relevant Departmental Manager BEFORE use. For high risk works such as Working at Heights and Confined Spaces, proof of competence must be provided and approved by the relevant Departmental Manager. There is also a requirement to adhere to Echo Marine Groups relevant Procedure for Prevention of Falls (PROC 14) and Confined Space (PROC 04). For hot works, compliance to Echo Marine Groups PROC 06 Hot Works Procedure must be adhered to. All of the above 9. What must be reported in the event of an accident or near miss on Echo Marine Groups Property? Injury Illness Accident Near miss All of the above 10. In the event of an injury, what process must be followed if the person must be taken to a hospital or other medical facility? Advise your supervisor Echo Marine Groups Incident/Near Miss Investigation Report Procedure (PROC 07) provides information on what is required in the event of an Injury requiring Medical attention. Nothing 11. What must be undertaken when reporting an Injury or Accident? Incident/Near Miss Investigation Form (OHS 02) is required to be completed and sent through the relevant departmental manager for processing Advise your Supervisor Report incident or injury as soon as possible through to HSEQ Manager All of the above 12. You are feeling unwell, what is expected of Contractors presenting to work? Flu like symptoms, remain at home until well enough to return to work Nausea and/or vomiting, diarrhoea and gastro like symptoms remain at home A risk to yourself and others (fatigue, shortness of breath etc), remain at home All of the above (seek medical advice if symptoms are of concern) 13. What can be done if you have a complaint regarding unacceptable practices or behaviours whilst on an Echo Marine Site? Tell your colleague Section 9 of Echo Marine Groups Human Resources Policy and Procedures Manual has advice on reporting. Speak with your Manager/Supervisor Above last two answers 14. What checks are expected before plugging in any electrical equipment for use on site? No damage to the Electrical Cord Machine looks in good service and repair Test Tag is the right colour and is in date All of the above 15. You witness a staff member place a cordless drill in their lunch bag, what course of action would you take? Ask what the going price at Cash Converters is and grab one for yourself Ignore what has been done, as it’s not your concern Report the suspicion to your Echo Marine Group Point of Contact Grab the tool from their bag and return it to where they took it from 16. You are next to an employee welding, when plastic in the vicinity catches alight, causing a fire. What are your immediate actions? Panic, screaming out of control, running out of the area Raise the alarm by yelling “Fire, Fire, Fire”, describe the risk and attempt to extinguish the Fire with a first aid appliance ONLY IF SAFE TO DO SO, Ring 000 Emergency Services as required Walk out of the compartment and leave it to someone else Keep working as someone else will sort it 17. The fire is now out of control. You hear a “Beep, Beep, Beep” alarm, what is your required action at this alarm? Isolate Gas Bottles, turn off electrical equipment, render the area as safe as possible and advise others near you to standby to evacuate Run to your Point of Contact and ask him what the alarm means Continue work, whilst complaining to your colleagues how annoying the alarm sound is Ignore the sound and continue working 18. The Alarm has changed tone to a “Woop, Woop, Woop”, what action is now required for all employees of Echo Marine Group? Ignore the noise and continue work, it is only noise Immediately evacuate the work area in an orderly fashion (Walk, not Run) via walkways and emergency exits to the nearest muster point (Mezzanine and Offices, north car park at the front of the facility - Muster Point 1, Workshop floor to the southwest - Muster Point 2) Head home for the day Put in some ear plugs Time's up Share This Article Share on FacebookShare on Facebook Share on XShare on X Pin itShare on Pinterest Share on LinkedInShare on LinkedIn
